Pasar al contenido principal

Main navigation

  • Sobre El ITEFI
  • Investigación
  • Formación y empleo
  • OpenLab
  • Servicios científico técnicos
  • Directorio

Numerical modelling of structures with thin air layers

vibro-acoustic
air layers
solar arrays
hybrid models
FEM/BEM
SEA
M. Chimeno, E. Roibás, J. López-Díez, F. Simón
Aerospace Science and Technology 38, 2014, pp. 20-29
http://dx.doi.org/10.1016/j.ast.2014.07.008

During launch, satellites and their equipment are subjected to vibration loads of random nature and within a wide frequency range. Their vibro-acoustic response is an important issue to be analysed, in particular, for structural components such as solar arrays in folded configuration. The modelling of these structures in the low frequency range (low modal density) requires combining models for the air layers, the structural elements and the surrounding air. This work studies different combinations of numerical methodologies (FEM, BEM, SEA) to model the system in order to simulate the modal and the vibro-acoustic responses outlining their advantages and drawbacks. The modal and acoustic simulated responses are determined and analysed to find out the efficiency of the combinations of the numerical methodologies proposed. Two different cases are considered: a simple benchmark case (two structural elements and one air layer) and a real solar wing design (three solar panels and two air layers). For the latter, experimental results on both the modal and vibro-acoustic responses are also presented.

Acknowledgements

This work has been supported by the European Space Agency (MCS/2007/1677/In/JSP) within the TRP study Vibro-Acoustics of Large Deployable Structures. Authors wish to thank Dr. Julian Santiago-Prowald, Mr. Guus Vermij and Dr. Marcel Ellenbroek for their helpful comments during the development of the present work.

GAA
Departamento de Acústica y Evaluación No Destructiva (DAEND)
  • GAA: Grupo de Acústica ambiental
  • G CARMA: Grupo de Caracterización de materiales mediante evaluación no destructiva
  • ULAB: Ultrasonidos para el análisis de líquidos y bioingeniería
Departamento de Tecnologías de la Información y Las Comunicaciones (DTIC)
  • GiCP: Grupo de investigación en Ciberseguridad y Protección de la Privacidad
  • GICSI: Grupo de investigación en Criptología y Seguridad de la Información
    • LCQE: Laboratorio de Comunicaciones Cuánticas
  • PSUM: Grupo de Procesamiento de Señal en sistemas Ultrasónicos Multicanal
Departamento de Sensores y Sistemas Ultrasónicos (DSSU)
  • GSTU: Grupo de Sistemas y tecnologías ultrasónicas
  • NoySI: Grupo de Nanosensores y Sistemas Inteligentes
  • RESULT: Resonadores ultrasónicos para cavitación y micromanipulación
  • SENSAVAN: Grupo de Tecnología de Sensores Avanzados
  • QE: Electrónica Cuántica
Laboratorios
  • Laboratorio de Acústica
  • Laboratorio de Metrología Ultrasónica Médica (LMUM)
  • Laboratorio de Comunicaciones Cuánticas
  • Laboratory for International Collaboration in Advanced Biophotonics Imaging

Instituto de Tecnologías Físicas y de la Información Leonardo Torres Quevedo  - ITEFI
C/ Serrano, 144. 28006 - Madrid • Tel.: (+34) 91 561 88 06  Contacto  •  Intranet
EDIFICIO PARCIALMENTE ACCESIBLE POR PERSONAS CON MOVILIDAD REDUCIDA