Pasar al contenido principal

Main navigation

  • Sobre El ITEFI
  • Investigación
  • Formación y empleo
  • OpenLab
  • Servicios científico técnicos
  • Directorio

Numerical Simulation of the Tension–Compression Behavior of Tie Connections in Brick Masonry Walls

brick masonry
veneer walls
steel ties
experimental analysis
cyclic loading
tension-compression
finite element
numerical analysis
Ortega, J.; Mendes, N.; Vasconcelos, G.
CivilEng 2022, 3, 441-455
https://doi.org/10.3390/civileng3020026

Brick masonry veneer walls connected to infill walls inserted in a reinforced concrete (RC) frame are a common constructive system in Portugal. The stability of the veneer wall is ensured by ties that make the connection with the masonry infill walls. These ties enable the transferring of out-of-plane loads to the main structure due to wind, and particularly due to earthquakes. However, the characterization of the seismic behavior of these tie connections is an insufficiently explored topic. The present paper shows a numerical investigation that aims to simulate experimental results of tension and compression tests performed on masonry prisms connected by means of steel ties. The main objective of the present research is to obtain a better understanding of the complex structural behavior of this specific construction system to then develop simplified numerical tools to be used in engineering practice for the seismic design and retrofitting of brick masonry veneer walls. The numerical results match well the experimental ones, and the validated approach can be used in the future to carry out parametric analyses to evaluate the influence of material and geometric properties of the tie and masonry, as well as the type of action and construction details.

Funding

The authors acknowledge the support of the Portuguese Foundation for Science and Technology (FCT), through the financing of the research project SEVen—Development of Sustainable Ceramic Brick Masonry Veneer Walls for Building Envelops (PTDC/ECI-CON/30876/2017).

G-CARMA
Departamento de Acústica y Evaluación No Destructiva (DAEND)
  • GAA: Grupo de Acústica ambiental
  • G CARMA: Grupo de Caracterización de materiales mediante evaluación no destructiva
  • ULAB: Ultrasonidos para el análisis de líquidos y bioingeniería
Departamento de Tecnologías de la Información y Las Comunicaciones (DTIC)
  • GiCP: Grupo de investigación en Ciberseguridad y Protección de la Privacidad
  • GICSI: Grupo de investigación en Criptología y Seguridad de la Información
    • LCQE: Laboratorio de Comunicaciones Cuánticas
  • PSUM: Grupo de Procesamiento de Señal en sistemas Ultrasónicos Multicanal
Departamento de Sensores y Sistemas Ultrasónicos (DSSU)
  • GSTU: Grupo de Sistemas y tecnologías ultrasónicas
  • NoySI: Grupo de Nanosensores y Sistemas Inteligentes
  • RESULT: Resonadores ultrasónicos para cavitación y micromanipulación
  • SENSAVAN: Grupo de Tecnología de Sensores Avanzados
  • QE: Electrónica Cuántica
Laboratorios
  • Laboratorio de Acústica
  • Laboratorio de Metrología Ultrasónica Médica (LMUM)
  • Laboratorio de Comunicaciones Cuánticas
  • Laboratory for International Collaboration in Advanced Biophotonics Imaging

Instituto de Tecnologías Físicas y de la Información Leonardo Torres Quevedo  - ITEFI
C/ Serrano, 144. 28006 - Madrid • Tel.: (+34) 91 561 88 06  Contacto  •  Intranet
EDIFICIO PARCIALMENTE ACCESIBLE POR PERSONAS CON MOVILIDAD REDUCIDA