Skip to main content

Main navigation

  • About ITEFI
  • Research
  • Formación y empleo
  • OpenLab
  • Servicios científico técnicos
  • Staff Directory

Development of modified nanocrystalline cellulose based bioinks

Clara M García Sáez, María Arevalo, Itciar González, Francisco J Parra Ruiz, Luis M Rodríguez-Lorenzo
ESB2022, 32nd Annual Conference of the European Society for Biomaterials. Book of Abstracts-Posters
http://hdl.handle.net/10261/287070

Cancer modeling has been of special interest since it paves the way for easing and modulating preclinical research model conditions. 3D modeling of equivalent tumor environments is required for the development of new therapies [1].

3D bioprinting is one of the most promising approaches to create in vitro 3D biomimetic models with relevant physiological characteristics for cancer research, however one of the main limitations of bioprinting is the lack of a consensus in the optimal conditions to be used for each specific application [2]. The development of tumor specific bioinks is one of the mayor challenges for the bioprinting of cancer models.

The objective of this project is the preparation and selection of the suitable components for preparing PANC-1 laden bioinks.

[1] Zhang et al ACS Biomat Scie Eng 2, 1710, 2016

[2] N. Cubo, et al , Biofabrication 9, 015006 (2016)

RESULT
Acoustics and Non Destructive Evaluation (DAEND)
  • Environmental Acoustics (GAA)
  • G Carma: Materials Characterization by Non Destructive Evaluation
  • ULAB, Ultrasounds for Liquid Analysis and Bioengineering
Information and Communication Technologies (TIC)
  • Cybersecurity and Privacy Protection Research Group (GiCP)
  • Research group on Cryptology and Information Security (GiCSI)
    • Quantum Communications Laboratory (LCQE)
  • Multichannel Ultrasonic Signal Processing Group (MUSP)
Sensors and Ultrasonic Systems (DSSU)
  • Ultrasonic Systems and Technologies (USTG)
  • Nanosensors and Smart Systems (NoySi)
  • Ultrasonic Resonators for cavitation and micromanipulation (RESULT)
  • Advanced Sensor Technology (SENSAVAN)
  • Quantum Electronics (QE)
Laboratorios
  • Laboratorio de Acústica
  • Laboratorio de Metrología Ultrasónica Médica (LMUM)
  • Laboratorio de Comunicaciones Cuánticas
  • Laboratory for International Collaboration in Advanced Biophotonics Imaging

Instituto de Tecnologías Físicas y de la Información Leonardo Torres Quevedo  - ITEFI
C/ Serrano, 144. 28006 - Madrid • Tel.: (+34) 91 561 88 06  Contacto  •  Intranet
EDIFICIO PARCIALMENTE ACCESIBLE POR PERSONAS CON MOVILIDAD REDUCIDA