Skip to main content

Main navigation

  • About ITEFI
  • Research
  • Formación y empleo
  • OpenLab
  • Servicios científico técnicos
  • Staff Directory

Multiple-Layer Microperforated Panels as Sound Absorbers in Buildings: A Review

sound absorption
microperforated panels
multi-layer systems
Pedro Cobo, Francisco Simón
Buildings 2019, 9(2), 53
https://doi.org/10.3390/buildings9020053

Sound absorbing materials are used in buildings to dissipate sound energy into heat using viscous and thermal processes. Sound absorbers increase the transmission loss of walls, decrease the reverberation time of rooms, and attenuate the noise generated by internal sound sources. Porous absorbers (fibrous, cellular, or granular) are the most used materials in noise control applications because of their high performance-to-cost ratio in the frequency band of interest. However, when cleaning conditions and health reasons are of concern, microperforated panel (MPP) absorbers may be the preferred choice. MPPs, consisting of many minute (sub-millimetric) holes in a panel, are tunable absorbers in a prescribed frequency band, whose main shortcomings are high manufacturing cost and limited absorption frequency band. Currently, the production cost of MPPs can be drastically reduced by means of modern techniques. The absorption frequency band can be considerably enlarged by designing multiple-layer MPPs (ML-MPPs). The aim of this article is to review the high potential of ML-MPPs as a modern, clean, and healthy alternative to porous materials for sound absorption.

Funding

This research was funded by the Ministry of Science, Innovation and Universities through grant number DPI2016-79559R.

GAA

proyecto/s relacionado/s

  • Métodos para la determinación de la respuesta vibroacústica y la reducción del acoplo fluido-estructura de estructuras de medios de transporte
    Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016, Programa Estatal de I+D+i Orientada a los Retos de la Sociedad (AEI), Fondos Feder
Acoustics and Non Destructive Evaluation (DAEND)
  • Environmental Acoustics (GAA)
  • G Carma: Materials Characterization by Non Destructive Evaluation
  • ULAB, Ultrasounds for Liquid Analysis and Bioengineering
Information and Communication Technologies (TIC)
  • Cybersecurity and Privacy Protection Research Group (GiCP)
  • Research group on Cryptology and Information Security (GiCSI)
    • Quantum Communications Laboratory (LCQE)
  • Multichannel Ultrasonic Signal Processing Group (MUSP)
Sensors and Ultrasonic Systems (DSSU)
  • Ultrasonic Systems and Technologies (USTG)
  • Nanosensors and Smart Systems (NoySi)
  • Ultrasonic Resonators for cavitation and micromanipulation (RESULT)
  • Advanced Sensor Technology (SENSAVAN)
  • Quantum Electronics (QE)
Laboratorios
  • Laboratorio de Acústica
  • Laboratorio de Metrología Ultrasónica Médica (LMUM)
  • Laboratorio de Comunicaciones Cuánticas
  • Laboratory for International Collaboration in Advanced Biophotonics Imaging

Instituto de Tecnologías Físicas y de la Información Leonardo Torres Quevedo  - ITEFI
C/ Serrano, 144. 28006 - Madrid • Tel.: (+34) 91 561 88 06  Contacto  •  Intranet
EDIFICIO PARCIALMENTE ACCESIBLE POR PERSONAS CON MOVILIDAD REDUCIDA