Pasar al contenido principal

Main navigation

  • Sobre El ITEFI
  • Investigación
  • Formación y empleo
  • OpenLab
  • Servicios científico técnicos
  • Directorio

One-Dimensional Metal Oxide Nanostructures for Chemical Sensors

metal oxide semiconductors
one-dimensional nanostructures
nanowires - NWs
nanofibers
heteronanostructures
chemical vapor deposition
hydrothermal synthesis
electrospinning
chemiresistors
field-effect transistors
electrohydrodynamic printing
Esther Hontañón and Stella Vallejos
P. V. Pham (ed.), 21st Century Nanostructured Materials - Physics, Chemistry, Classification, and Emerging Applications in Industry, Biomedicine, and Agriculture, IntechOpen, London.
https://doi.org/10.5772/intechopen.101749

The fabrication of chemical sensors based on one-dimensional (1D) metal oxide semiconductor (MOS) nanostructures with tailored geometries has rapidly advanced in the last two decades. Chemical sensitive 1D MOS nanostructures are usually configured as resistors whose conduction is altered by a charge-transfer process or as field-effect transistors (FET) whose properties are controlled by applying appropriate potentials to the gate. This chapter reviews the state-of-the-art research on chemical sensors based on 1D MOS nanostructures of the resistive and FET types. The chapter begins with a survey of the MOS and their 1D nanostructures with the greatest potential for use in the next generation of chemical sensors, which will be of very small size, low-power consumption, low-cost, and superior sensing performance compared to present chemical sensors on the market. There follows a description of the 1D MOS nanostructures, including composite and hybrid structures, and their synthesis techniques. And subsequently a presentation of the architectures of the current resistive and FET sensors, and the methods to integrate the 1D MOS nanostructures into them on a large scale and in a cost-effective manner. The chapter concludes with an outlook of the challenges facing the chemical sensors based on 1D MOS nanostructures if their massive use in sensor networks becomes a reality.

Acknowledgments

The programme Interreg V Sudoe of the EU (Grant SEO2/P1/E569, NanoSen-AQM) is acknowledged for funding this publication. SV acknowledges the support of MCIN/AEI/10.13039/501100011033, via Grant PID2019-107697RB-C42 (ERDF A way of making Europe).

NOySI

proyecto/s relacionado/s

  • Desarrollo y validación en campo de un sistema de nanosensores de bajo consumo y bajo coste para la monitorización en tiempo real de la calidad del aire ambiente
    Fondos Feder
Departamento de Acústica y Evaluación No Destructiva (DAEND)
  • GAA: Grupo de Acústica ambiental
  • G CARMA: Grupo de Caracterización de materiales mediante evaluación no destructiva
  • ULAB: Ultrasonidos para el análisis de líquidos y bioingeniería
Departamento de Tecnologías de la Información y Las Comunicaciones (DTIC)
  • GiCP: Grupo de investigación en Ciberseguridad y Protección de la Privacidad
  • GICSI: Grupo de investigación en Criptología y Seguridad de la Información
    • LCQE: Laboratorio de Comunicaciones Cuánticas
  • PSUM: Grupo de Procesamiento de Señal en sistemas Ultrasónicos Multicanal
Departamento de Sensores y Sistemas Ultrasónicos (DSSU)
  • GSTU: Grupo de Sistemas y tecnologías ultrasónicas
  • NoySI: Grupo de Nanosensores y Sistemas Inteligentes
  • RESULT: Resonadores ultrasónicos para cavitación y micromanipulación
  • SENSAVAN: Grupo de Tecnología de Sensores Avanzados
  • QE: Electrónica Cuántica
Laboratorios
  • Laboratorio de Acústica
  • Laboratorio de Metrología Ultrasónica Médica (LMUM)
  • Laboratorio de Comunicaciones Cuánticas
  • Laboratory for International Collaboration in Advanced Biophotonics Imaging

Instituto de Tecnologías Físicas y de la Información Leonardo Torres Quevedo  - ITEFI
C/ Serrano, 144. 28006 - Madrid • Tel.: (+34) 91 561 88 06  Contacto  •  Intranet
EDIFICIO PARCIALMENTE ACCESIBLE POR PERSONAS CON MOVILIDAD REDUCIDA