Pasar al contenido principal

Main navigation

  • Sobre El ITEFI
  • Investigación
  • Formación y empleo
  • OpenLab
  • Servicios científico técnicos
  • Directorio

Optimized auto-focusing method for 3D ultrasound imaging in NDT

G. Cosarinsky, J.F. Cruza, M. Muñoz, J. Camacho
NDT & E International, Volume 134, 2023, 102779, ISSN 0963-8695
https://doi.org/10.1016/j.ndteint.2022.102779

In this work, we propose an optimized auto-focusing algorithm to be used with ultrasound matrix arrays for three-dimensional imaging in the presence of interfaces. Its main application is for non-destructive-testing (NDT), where usually two mediums with different propagation velocities are present. The refraction at the interface between those mediums complicates the calculation and the application of the focusing delays, which requires iterative processes that are usually the main bottleneck for high-speed inspections. 

We tackle this problem by generalizing the virtual array concept previously proposed for linear arrays and plane images to the case of matrix-arrays and three-dimensional (3D) beamforming. Furthermore, we propose a two-dimensional iterative algorithm for exact time-of-flight calculation to the two foci per scan line required by the virtual array. The mathematical formulation for the 3D case is obtained and the time-delay errors are analyzed by simulation. Finally, image quality with the proposed method is compared with that obtained with conventional Total Focusing Method (TFM) and exact delay calculation. The principal conclusion is that the virtual array approach generates images with equivalent quality to those obtained by exact calculation, while it reduces more than two orders of magnitude the computation load.

Acknowledgements.

 This research was supported by the project PDC2022-133504-I00 founded by MCIN/AEI/10.13039/501100011033 (Spain) and “Next Generation EU”/PRTR (European Union) and by the fellowship PRE2019-088602 founded by MCIU (Spain).

GSTU

proyecto/s relacionado/s

  • Nueva generación de sistemas para imagen ultrasónica tridimensional en la industria
    Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023
Departamento de Acústica y Evaluación No Destructiva (DAEND)
  • GAA: Grupo de Acústica ambiental
  • G CARMA: Grupo de Caracterización de materiales mediante evaluación no destructiva
  • ULAB: Ultrasonidos para el análisis de líquidos y bioingeniería
Departamento de Tecnologías de la Información y Las Comunicaciones (DTIC)
  • GiCP: Grupo de investigación en Ciberseguridad y Protección de la Privacidad
  • GICSI: Grupo de investigación en Criptología y Seguridad de la Información
    • LCQE: Laboratorio de Comunicaciones Cuánticas
  • PSUM: Grupo de Procesamiento de Señal en sistemas Ultrasónicos Multicanal
Departamento de Sensores y Sistemas Ultrasónicos (DSSU)
  • GSTU: Grupo de Sistemas y tecnologías ultrasónicas
  • NoySI: Grupo de Nanosensores y Sistemas Inteligentes
  • RESULT: Resonadores ultrasónicos para cavitación y micromanipulación
  • SENSAVAN: Grupo de Tecnología de Sensores Avanzados
  • QE: Electrónica Cuántica
Laboratorios
  • Laboratorio de Acústica
  • Laboratorio de Metrología Ultrasónica Médica (LMUM)
  • Laboratorio de Comunicaciones Cuánticas
  • Laboratory for International Collaboration in Advanced Biophotonics Imaging

Instituto de Tecnologías Físicas y de la Información Leonardo Torres Quevedo  - ITEFI
C/ Serrano, 144. 28006 - Madrid • Tel.: (+34) 91 561 88 06  Contacto  •  Intranet
EDIFICIO PARCIALMENTE ACCESIBLE POR PERSONAS CON MOVILIDAD REDUCIDA